Car Dent Repair Tool Set Auto Body Parts

?Note?
Size: The puller kit does not contain glue. If you need, just buy a glue gun and glue sticks additionally



Packaging included:
Extractor kit (without glue): 1 * extractor, 18 * tabs

Characteristics:
100% new and high quality.
It is made of aluminum alloy for strong strength and long durability.
Used as an adapter for slide hammer or pulling tap for easy catching and pulling.
A necessary component for dent repair, direct replacement for the broken one.
Easy installation, thread size is M10 for better application.

Specification:
Material: aluminum alloy
Color: As the picture shows
Type: M10
Size: as picture show



How to use these paintless dent repair kits:
1. Wipe the dent with a clean damp cloth
2. Mount the glue stick to the glue gun, pull the trigger to allow the glue stick to enter the glue gun, connect the power supply and preheat for 5 minutes
3. Use a suitable drawing board. Large dent requires large drawing joint. (Note: The larger the
drawing board is, the greater the drawing force is)
4. Pull the trigger and apply the drawing board with extruded glue (the 4 holes of the board need to be applied with hot melt glue)
5. Quickly place the drawing board with hot melt glue in the center of the dent, press lightly until the glue cures and adheres (let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly shorter in winter)
6. Align T and press the drawing board shape repairer with hot melt glue, pull the sliding rod back to lift the dent
7. Check with a line board. If dent still exists, tap lightly with a hammer or flattening pen.
8. Clean the repaired place with a clean, damp cloth