ANSI A4 Anti Cut Work Glove Micro Foam Nitrile HPPE Maxi High f

Item No:NJ384

HPPE fiberglass and spandex yarn, seamless, nitrile palm dipped, foam finish, CE EN388 5 degree cut resistant work glove cut proof. (EN388 Cut 5 Equal to ANSI cut level 4) .

Characteristics:

• CONFORMS TO EN388:2016 levels 4-X-4-3-D; (EN388 Cut 5 Same as ANSI Cut level 4);

• Fiberglass and HPPE for unmatched cut protection;

• Thin 13 gauge weave provides a high degree of dexterity and flexibility;

• Ergonomic shape for the natural curves of the hand;

• Foam nitrile palm coating to meet different requirements, especially for superior grip in oily conditions;

• Washable and bleachable (below 145°C);

• Size: Medium/8, Large/9,XLarge/10

Precautions:

1: Do not use it for any other purpose,

2: Keep away from combustibles,

3: Gloves may cause allergies. In case of allergies, stop using them immediately,

4: This glove is not chemically resistant,

5:No direct contact with chemicals,

6: Store in a cool, dry place, avoid direct sunlight.

Cleaning and maintenance guide:

1:Use industrial soap or detergent (do not use chemical cleaning agents or bleach),

2: Hot water washing, water temperature does not exceed 50 degrees Celsius,

3: Washing time about 5 minutes,

4: Whitening in hot water,

5: In especially heavy dirt case, it is recommended to soak for 10 minutes and then repeat washing and bleaching,

6: Finally, whitening in cold water,

7: Dry.