2000W,2200W,2500W,2800W hot air gun Digital temperature display

2000W-2800W Industrial Electric Hot Air Gun Digital Display Car Film Heat Gun Soldering Air Dryer Thermal Blower Soldering Station Shrink Wrapping Tools

CAUTION: This is a high precision heat gun. When set to 0 to close the heat gun. The air motor of the heat gun will continue to run for 10 seconds until the high temperature gas comes out. This is not the quality problem. We do a long laboratory test and prove that using 10 seconds protection can protect the LCD screen and PCB board. The result is that the service life is up to 20000 hours. (This function is only available for 1, 2 and 858A+2000W models, other models do not have this function)

Technical parameter:
Supply voltage: 220V
Power Watt:
F1 2000W
F2 2000W
F3 2500W
F4 2800W

Plug type: EU
Approximate air flow for Step 1:350L/min
Approximate air flow for Step 2:600L/min
Weight: 0.85kg
Minimum temperature: 60 degrees Celsius
Maximum temperature: 600 degrees Celsius

Application:
Eliminate Pain/Peel Old Wallpaper/Remove Plastic Tiles/Bend PVC Pipe/Melt Junk in Pipe/Remove Greasy Junk/For Shrink Wrapping

Note:
(F4 2800W) Do not pull out the plug until the motor has completely stopped running 10 seconds later.

Thermal gun of 2000 W LCD temperature adjustable mini heat-retractable soffiatore with four-hole construction

With delayed shutdown function, the hot air gun continues to blow cold air to cool the heating core, protect the heating core and extend the service life

Insulated heating core imported from Germany
Mabuchi-Motor imported from Japan

Product characteristics
1.Double Heating Cable Rises Quickly
2. Mica thermal insulation of the gun barrel is safe and reliable
3. ABS nylon engineering handle is comfortable to hold
4. Two-gear wind speed regulation is suitable for many scenarios

Issues requiring attention
? When using the heat gun, try to use it in a dry place.
? When using the hot air gun or just after use, do not touch the nozzle to avoid burns.
? The handle of the hot air gun should be kept dry, clean and away from oil or gas.
? After using the hot air gun, the air outlet is upward and can be stored only after the air gun cools down.
? Do not block or cover the air inlet and outlet of the hot air gun.

Security warning:
1. Please do not use it as a hair dryer to blow my hair.
2. Do not point the heat gun directly at people or animals
3. Do not use near flammable and flammable gases

Product parameters
Operating voltage: 220-240V/50Hz
Power consumption: 2000W
Temperature range: 60-650?
Temperature regulation mode: key temperature regulation
Air volume: 110V( I 180-300 L/min II 250-350L/min)
220V( I 250-350L/min II 350-500L/min)
Switch: Adjustable second gear wind speed
Shell material: PP + 15% fiberglass
Back cover shell material: ABS
Engine: Japan 365 Mabuchi-Motor
Heating cylinder: Luo iron plated material
Heating core: Gold mica plate + insulated heating core + jump switch + ceramic frame
Power cord: rubber power cord + European standard two-plug 3C certification standard 1.8 m (external 1.5 m), including ground connection
2-1.0m3 in the machine part, with an outer diameter of 6.8mm

Hot Air Gun Hair Dryer Heat Gun Dryer for Soldering Thermal Blower Shrink Wrap Plastic Welder Tools Heat Gun Thermal Blower Heat Shrink Hair Dryer Adjustable Temperature Hot Air Gun Gun heat shrinkable, industrial dryer 220V, industrial hot air gun 110V, construction hair dryer, technical hair dryer, construction dryers.